+90 (312) 244 63 25
tr
tr

CONCORDE Street Lighting Luminaire

CNC-400SM-AL
CONCORDE Street Lighting Luminaire

Lighting elements equipped with light sources, used for illuminating roads and streets, are called Road&Street Luminaires or Street Lighting Fixtures. Road&Street lighting fixtures can be used in urban lighting, intercity roads, environmental and security lighting, ports and open parking lots. Since Street lighting fixtures are used in outdoor conditions, they must have a minimum IP66 protection class. Street lighting should comply with the international standard EN-60598-2-3 and this conformity should be documented.

Optical and Electrical Specification
  • Lamp Power : 400W
  • Lamp Flux : 56500 lm
  • Lamp Holder : E-40
  • Lamp Efficacy : 130+ lm/W
  • Input Voltage : 220-240 VAC
  • Input Frequency : 50-60 Hz
  • Ballast Type : Sodium Vapour Ballast
  • Power Factor : >0,9
  • Max Voltage Strength : 6 kV-10 kV (Optional)
  • LED Color Temperature (CCT) : 2000K / 2200K / 2700K
  • Color Rendering Index (CRI) : >25
Standart Specification
  • Housing : Re-cycle Polymer, Die-Cast Aluminum
  • Refractor : Heat and impact resistant tempered glass
  • IP Class : IP65
  • Assembling Method : Side or top entry mounting(Mounting Diameter Φ = 42 / 60 mm)
  • Light Source : Sodium Vapour Lamp
  • Optical : Aluminum Reflector
  • Operation Temperature : -25°/+55°C
  • IK Class : IK 08 – IK 10 (Optional)
  • Gasket : Polyurethane cast/Epidiene
  • Latch: Aluminum
  • Tilt Angle : -15° / +15°
  • Other : Angle adjustment from the tail section, 90 degrees usability, time adjustable ignitor, thermal switch ballast application, photocell application, different RAL coded color options
General Application Areas
City Lighting
Ports And Open Parkins
National Gardens
Environmental And Safety Lighting
Testing Standards
  • EN 60598 1:2015+A1:2018
  • EN 60598 2 13:2006+A1:2012+A2:2016
  • EN 62262:2002 IEC TR 62778:2014
Technical Drawing
Product Images
Product Variations
Product CodePowerInput VoltageLamp FluxBallast WindingDimensionsWeight
CNC-100SM-AL100 W 220-240 VAC 50-60 HZ 10700 lm Aluminum Winding Ballast635x270x205 mm 5,2 kg
CNC-100SM-CU100 W220-240 VAC 50-60 HZ10700 lmCopper Winding Ballast635x270x205 mm5,2 kg
CNC-150SM-AL150 W220-240 VAC 50-60 HZ17500 lmAluminum Winding Ballast635x270x205 mm5,2 kg
CNC-150SM-CU150 W220-240 VAC 50-60 HZ 17500 lm Copper Winding Ballast635x270x205 mm5,2 kg
CNC-250SM-AL250 W 220-240 VAC 50-60 HZ33200 lmAluminum Winding Ballast635x270x205 mm5,2 kg
CNC-250SM-CU250 W220-240 VAC 50-60 HZ33200 lmAluminum Winding Ballast635x270x205 mm5,2 kg
CNC-400SM-AL400 W220-240 VAC 50-60 HZ56500 lmAluminum Winding Ballast635x270x205 mm5,2 kg
CNC-400SM-CU400W220-240 VAC 50-60 HZ56500 lmCopper Winding Ballast635x270x205 mm5,2 kg
Downloads

Installation Manual

Comments

No comments yet. You can be the first filling the form below.