+90 (312) 244 63 25
tr
tr

Intelligent Lighting System

Intelligent Lighting System

“From Odak R&D Center, specially designed for small and medium-sized projects, intelligent lighting control system fully compatible with the smart city common management platform.”

Luxtra Smart Lighting System, city lighting and traffic management can be controlled from a single screen. All devices that connected to the system are controlled through a single software and no additional payment is required for the software.

You can use control software that protected by advanced security layers on your own server or on our co-servers located in Turkiye.

Luxtra intelligent lighting system eliminates system complexity in smart city solutions. It does not need extra wiring for the data line or wireless receiver for each mast. Makes all control over the existing power line. By controlling the electric current going to the lighting armature, it can change the brightness, execute open-close commands or perform fault detection

System architecture basically consists of three hardware. Central Control Unit (CCU) that connects to the remote server and manages the system, Group Control Unit (GCU), which transfers bi-directional data over the power line with lighting armatures, and DOB LED light module embedded in the driver, which can be controlled directly over the power line. Central Control Unit and Group Control Unit are located inside the control panel which is called SLC (Intelligent Lighting System). While there is a central controller in each panel, group control cards can be increased according to need thanks to the modular structure.

For example; 1 Group Control Unit is sufficient to manage up to 64 lighting devices. To manage up to 128 lighting devices, 2 Group Control Units should be used. It is sufficient to have 1 piece Central Control Unit in both systems. System configuration is done by our technical team according to your needs. It is enough to make the cable connections and energize the system.

Technical Specifications
  • Input Voltage: 85-265V AC
  • Power consumption: 5 W
  • Lighting Device: 256
  • Number of Independent Groups: 32
  • Load Capacity: 6 kW
  • Maximum Line Length: 2 km
  • Connection Interface: Ethernet/GSM
  • Sensor Inputs: Warmth, Luminous, Movement
  • Automatic Software Upgrade: Exists
  • Control: Opening/Closing, Axe
  • Over Voltage and Lightning Protection: 6 kV
  • Protection Class: IP67
  • Operating Temperature: -40°C/+75°C
  • Weight: 2,7 kg
  • Dimension: 52x40x20 cm
Downloads

LDT File

Installation Manual

Ziyaretçi Yorumları

Henüz yorum yapılmamış. İlk yorumu aşağıdaki form aracılığıyla siz yapabilirsiniz.