Meteorology Station

The Professional Ultrasonic Weather Station is a weather station integrated with multiple high accuracy sensors. The Ultrasonic Weather Station can perform simultaneous measurement of multiple parameters: wind speed, wind direction, atmospheric temperature, atmospheric humidity, barometric pressure, precipitation, solar radiation, brightness and particulate matter pollutant measurement from 1 micro meter to 10 micro meters (PM1.0/PM2.5/PM10).

Thanks to its ultrasonic technology, wind direction and intensity can be measured with high accuracy, while its design with no moving parts allows for easy installation.

Our meteorological station is made of thermoplastic material also known as ASA. The body material ASA, which has high resistance to all weather conditions, is also extremely resistant to UV rays. With its non-corrosive outer surface, it can meet a service life of 10 years thanks to its sun, frost and high temperature resistant structure.

Thanks to the built-in heater, it provides uninterrupted 24/7 operation even in cold weather. It does not require on-site calibration and is simple to install and can be commissioned quickly.

A 24GHz radar module is integrated that can quickly detect the type and intensity of rain, snow and hail.

With the optional GPS/GNSS module, latitude and longitude and movement speed can be measured and the accuracy and location information can be compared with additional software to increase the accuracy rate.

•Durable design and easy installation with no moving parts thanks to ultrasonic technology,

•Uninterrupted 24/7 operation even in cold weather thanks to the built-in heater,

•Communication via RS485, RS 2332 or SDI-12 protocol. Modbus-RTU or SDI-12 output possibility,

•Non-contact and accurate measurement of precipitation (Snow, Rain, Hail) with radar technology,

•GNSS (Global Positioning Module) module can be added upon request.

• Input Voltage: 12-24 VDC, 220V AC (Optional)
• Power Consumption : 10~110mA@12V excluding heating, <250mA@12V including heating
• Data Output / Communication Protocol: RS232, RS485, SDI-12 / Modbus-RTU or SDI-12
• Contact: ± 20 %
• Product Dimension: Ø144 * 248 mm
• Operating Conditions (Temperature / Humidity): -40℃ – +70℃ / 0 – %100
• Module Content: Emitting Module, Receiving Module, Control Module
• Body Material: ASA Thermoplastic
• Warranty Period: 2 years